|
datasheetdetails
|
<< | < | AX-MPR1-2-RL - 2kW Din Mount Heating Regulator, Single Phase with Raise/Lower Input
|
| |
|
|
The AX-MPR1-2-RL DIN Rail Power Regulator is designed to operate from the output of a raise lower valve controller. The normal Raise/Lower (valve open/close) signal is converted to a pulse width modulated output for an electric heater. The AX-MPR1-2-RL is intended to operate with a 2.5 minute signal from fully closed to fully open; the output tracks the inputs in a linear fashion, automatically calibrating each time the minimum or maximum extremes are met. The output to the electric heater is controlled by solid-state switching with “zero crossing” technology to reduce RFI problems and provide accurate switching control. The AX-MPR1-2-RL features LED indication of Output On. |
Product Features
| • 24Vac Raise/Lower Input
• No additional heatsinks required
• PWM Control
| • 230Vac input from load
• DIN Rail (TS35) Mounting
• LED Indication
|
Input
| 24Vac Raise/Lower Input
| Power Supply
| 230Vac (from load input)
| Max Heater Duty
| See datasheet
| Rated Load
| See datasheet
| Rated Supply
| 220 - 255Vac / 50-60Hz
| LED Indication
| ON when output is on.
| Dissipated Heat
| See datasheet
| Control Terminals
| Rising Clamp for 0.5-2.5mm² Cable
| Power Terminals
| Rising Clamp for 1.5mm² Stranded or 2.5mm² Solid Core Cable
| Ambient Temp. Range
| 0 to 55°C Note; The units are rated at 30°C. If using at higher ambient temperature de-rate the units by 10% for every 5°C above 30°C.
| Country of Origin
| United Kingdom
|
| AX-MPR1-2-RL.pdf / 2kW Single Phase Power Regulator with Raise/Lower input |  |
|
|
|
